vcut05d1-sd0 www.vishay.com vishay semiconductors rev. 1.0, 01-sep-11 1 document number: 83443 for technical questions, contact: esdprotection@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 bidirectional symmetrical (bisy) single line esd-protection diode in silicon package marking (example only) 1 = year code open circle = month code and pin 1 xy = type code features ? ultra compact clp0603 package ? low package height < 0.3 mm ? 1-line esd-protection ? working range 5.5 v ? low leakage current < 0.1 a ? low load capacitance c d = 10 pf ? esd-protection acc. iec 61000-4-2 30 kv contact discharge 30 kv air discharge ? lead plating: au (e4) ? lead material: tiniag ? compliant to rohs directive 2002/95/ec and in accordance to weee 2002/96/ec note ** please see document vishay material category policy: www.vishay.com/doc?99902 0.3 0.27 0.6 22544 22543 xy 1 22454 ordering information device name ordering code taped units per reel (8 mm tape on 7" reel) minimum order quantity vcut05d1-sd0 vcut05d1- sd0-g4-08 15 000 15 000 package data device name package name type code weight molding compound flammability rating moisture sensitivity level soldering conditions vcut05d1-sd0 clp0603 d1 0.12 mg ul 94 v-0 msl level 1 (according j-std-020) 260 c/10 s at terminals reflow soldering according jedec std-020 absolute maximum ratings parameter test conditions symbol value unit peak pulse current acc. iec 61000-4-5, 8/20 s/single shot i ppm 6a peak pulse power pin 1 to pin 2 acc. iec 61000-4-5; t p = 8/20 s; single shot p pp 78 w esd immunity contact discharge acc. iec61000-4-2; 10 pulses v esd 30 kv air discharge acc. iec61000-4-2; 10 pulses 30 operating temperature junction temperature t j - 55 to + 145 c storage temperature t stg - 55 to + 150 c
vcut05d1-sd0 www.vishay.com vishay semiconductors rev. 1.0, 01-sep-11 2 document number: 83443 for technical questions, contact: esdprotection@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 cut the spikes with vcut05d1-sd0 the vcut05d1-sd0 is a bidirectional and symmetrical (bisy) esd-protection device which clamps positive and negative overvoltage transients to ground. connected between the signal or data line and the ground the vcut05d1-sd0 offers a high isolation (low leakage current, low capacitance) within the spec ified working range. due to the short leads and small package size of the tiny clp0603 package the line inductance is very lo w, so that fast transients like and esd-strike can be clamped with minimal over- or undershoots. typical characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - esd discharge current wave form acc. iec 61000-4-2 (330 ? /150 pf) fig. 2 - 8/20 s peak pulse current wave form acc. iec 61000-4-5 fig. 3 - typical capacitance c d vs. reverse voltage v r fig. 4 - typical reverse voltage v r vs. reverse current i r electrical characteristics (t amb = 25 c, unless otherwise specified) parameter test conditions/remarks symbol min. typ. max. unit protection paths number of li nes which can be protected n channel --1lines reverse stand-off voltage v rwm --5.5v reverse voltage at i = 0.1 a v r 5.5 7.5 8.5 v reverse current at v = 5.5 v i r --0.1a reverse breakdown voltage at i = 1 ma v br 6.5 8 9 v reverse clamping voltage at i pp = 1 a v c -8.810v at i pp = i ppm = 6 a v c -1113v capacitance at v = 0 v; f = 1 mhz c d -1013pf at v = 2.5 v; f = 1 mhz c d -8.5- pf 0 % 20 % 40 % 60 % 80 % 100 % 120 % - 10 0 10 20 30 40 50 60 70 80 90 100 time (ns) discharge current i esd rise time = 0.7 ns to 1 ns 53 % 27 % 20557 0 % 20 % 40 % 60 % 80 % 100 % 010203040 time (s) i ppm 20 s to 50 % 8 s to 100 % 20548 v r (v) c d (pf) 22546 0 2 4 6 8 10 12 01234567 f = 1 mhz i r (a) v r (v) 22547 10 -2 10 -1 110 1 10 2 10 3 10 4 0 1 2 3 4 5 6 7 8 9
vcut05d1-sd0 www.vishay.com vishay semiconductors rev. 1.0, 01-sep-11 3 document number: 83443 for technical questions, contact: esdprotection@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 fig. 5 - typical peak clamping voltage v c vs. peak pulse current i pp fig. 6 - typical clamping perf ormance at 8 kv contact discharge acc. iec 61000-4-2 fig. 7 - typical clamping perf ormance at 8 kv contact discharge acc. iec 61000-4-2 fig. 8 - typical clamping perfor mance at 8 kv co ntact discharge acc. iec 61000-4-2 0 2 4 6 8 10 12 01234567 mea s ured acc. to iec 61000-4-5 (8 s /12 s - wave form) v c v c in (v) i pp in (a) 22548 - 5 - 10 - 15 - 20 - 25 - 30 - 35 - 40 - 45 0 5 10 - 10 0 102030405060708090 acc. iec 61000-4-2 - 8 kv contact di s charge t (n s ) v c-e s d (v) 22569 - 5 0 5 10 15 20 25 30 35 40 - 10 - 10 0 102030405060708090 t (n s ) v c-e s d (v) acc. iec 61000-4-2 + 8 kv contact di s charge 22570 - 30 - 20 - 10 0 10 20 30 0 5 10 15 20 25 30 v c-e s d 30 n s v e s d (kv) v c-e s d (v) acc. iec 61000-4-2 contact di s charge 22571
vcut05d1-sd0 www.vishay.com vishay semiconductors rev. 1.0, 01-sep-11 4 document number: 83443 for technical questions, contact: esdprotection@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters (mils): clp0603-2l foot print recommendation: created - date: 22. nov. 2010 document no.: s 8-v-3906.04-023 (4) 2 terminal s ilicon package ( s i0603) 22590 package = chip dimen s ion s in mm s older re s i s t ma s k 0.3 0.28 s older pad 0.75 0.28 0.02 0.02 a1 e e b a d rev.2 - date: 03. aug. 2011 l e1 millimeter s a a1 b d e e min. nom. max. min. nom. max. 0.24 0.22 0.27 0.57 0.27 0.25 0.30 0.60 0.40 0.30 0.02 0.28 0.33 0.63 mil s 9.44 8.66 10.62 22.44 10.63 9.84 11.81 23.62 15.75 11.81 0.79 11.02 12.99 24.80 l 0.12 0.15 0.18 4.72 5.91 7.09 e1 0.25 9.84
vcut05d1-sd0 www.vishay.com vishay semiconductors rev. 1.0, 01-sep-11 5 document number: 83443 for technical questions, contact: esdprotection@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 carrier tape in millimeters: clp0603 a a-a s ection a 4 0.1 2 0.05 1.75 0.1 b b 8 + 0.3 - 0.1 b-b s ection 0.37 0.03 0.67 0.03 5 max. 2 0.33 0.03 0.2 0.02 ? 0.2 0.05 ? 1.55 0.05 3.5 0.05 cummulative tolerance s of 10 s procket hole s i s +/-0.2 mm 22591 carrier tape s i0603 document no. s 8-v-3906.04-0025 (4) created - date: 22. nov. 2010
document number: 91 000 www.vishay.com revision: 11-mar-11 1 disclaimer legal disclaimer notice vishay all product, product specifications and data ar e subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectivel y, vishay), disclaim any and all liability fo r any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicab le law, vishay disc laims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, incl uding without limitation specia l, consequential or incidental dama ges, and (iii) any and all impl ied warranties, including warran ties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of pro ducts for certain types of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in gene ric applications. such statements are not binding statements about the suitability of products for a partic ular application. it is the customers responsibility to validate that a particu lar product with the properties described in th e product specification is su itable for use in a particul ar application. parameters provided in datasheets an d/or specifications may vary in different applications and perfo rmance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vishays term s and conditions of purchase, including but not limited to the warranty expressed therein. except as expressly indicated in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vishay product co uld result in person al injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk and agr ee to fully indemnify and hold vishay and it s distributors harmless from and against an y and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that vis hay or its distributor was negligent regarding the design or manufact ure of the part. please contact authorized vishay personnel t o obtain written terms and conditions regarding products designed fo r such applications. no license, express or implied, by estoppel or otherwise, to any intelle ctual property rights is gran ted by this document or by any conduct of vishay. product names and markings noted herein may be trademarks of their respective owners.
|
